Engineering & Complete Plants

HT Series Plastic Injection Moulding Machines

Item			HTL980			HTL1380			HTL1680			HTL2680			HTL2980			HTL3800			HTL5800
			A	B	C	A	B	C	A	B	C	A	B	C	A	B	C	A	B	C	A	B	C
Injection Unit	Screw Diameter	mm	32	35	38	38	42	45	42	45	50	50	55	60	55	60	65	70	75	80	90	95	100
	Screw L/D Ratio	L/D	23	21.3	19.6	22.1	20	18.6	21.4	20	18	23	21	19.2	21.8	20	18.4	21	19	18	20	19	18
	Shot Volume (Theoretical)	cm³	132	158	186	188	230	260	278	320	395	455	550	655	590	706	829	1231	1414	1608	2544	2835	3140
	Injection Weight (PS)	g	118	138	168	163	200	230	260	300	370	416	503	600	530	635	746	1120	1286	1463	2315	2580	858
	Injection Rate	g/s	80	95	110	95	115	130	124	138	158	188	227	270	218	258	308	360	395	430	470	530	580
	Plasticizing Capacity	g/s	12	16	18	18	23	27	22	25	28	30	38	43	36	40	48	58	68	78	75	88	110
	Injection Pressure	Mpa	203	170	143	205	170	147	200	170	143	205	169	142	200	168	142	199	173	152	184	165	149
	Screw Speed	rpm	200			200			180			180			180			160			125
Clamping Unit	Clamp Force	kn	980			1380			1680			2680			2980			3800			5800
	Open Stroke	mm	350			380			420			520			590			690			820
	Space Between Tie Bars (W×H)	mm	360×360			400×380			460×430			538×520			585×565			720×700			820×800
	Max. Mould Height	mm	380			400			420			520			680			780			900
	Min. Mould Height	mm	150			150			150			200			200			250			350
	Ejector Stroke	mm	100			110			130			130			150			150			200
	Ejector Force	kn	35			38			38			70			70			91			150
Others	Max. Pump Pressure	Mpa	16			16			16			16			16			16			16
	Pump Motor Power	kw	11			13			15			22			30			37			55
	Heating Power	kw	6.05			7.75			10.35			14.85			17.5			23.3			36.3
	Machine Dimension (L×W×H)	m	4.0×1.1×1.8			4.6×1.27×1.82			4.9×1.52×2.0			5.95×1.6×2.1			6.13×1.65×2.2			6.8×1.75×2.5			8.8×2.15×2.65
	Machine Weight	t	3.4			3.8			6			8			9			15.4			26

Item			HTL10000				HTL11800				HTL13900			HTL16600			HTL20000
Item			A	B	C	D	A	B	C	D	A	B	C	A	B	C	A	B	C	D
Injection Unit	Screw Diameter	mm	90	100	110	115	110	115	120	125	110	120	130	120	130	140	130	140	150	160
	Screw L/D Ratio	L/D	22.3	20	18.2	17.4	21.5	20	19.2	18.4	26.18	24	22.15	26	24	22	25.8	24	22.4	18.4
	Shot Volume (Theoretical)	cm³	2920	3610	4369	4778	4430	4850	5251	5706	5559	6616	7764	6672	7831	9080	8760	10155	11660	13670
	Injection Weight (PS)	g	2670	3300	3980	4352	4000	4360	4728	5162	5059	6020	7060	6071	7126	8260	7971	9240	10600	12427
	Injection Rate	g/s	581	717	836	884	794	867	940	964	800	945	1110	895	1050	1200	1070	1220	1400	1593
	Plasticizing Capacity	g/s	75	95	118	129	122	134	146	158	105	125	145	126	148	172	150	180	206	232
	Injection Pressure	Mpa	216	176	146	133	186	170	156	144	208	175	150	195	165	145	190	163	142	125
	Screw Speed	rpm	110				100				95			90			88
Clamping Unit	Clamp Force	kn	10000				11800				13900			16600			20000
	Open Stroke	mm	1000				1180				1350			1550			1600
	Space Between Tie Bars (W×H)	mm	1080×1000				1180×1100				1310×1300			1500×1400			1650×1500
	Max. Mould Height	mm	1100				1200				1400			1500			1620
	Min. Mould Height	mm	400				450				600			700			800
	Ejector Stroke	mm	325				325				360			450			420
	Ejector Force	kn	200				260				260			500			430
Others	Max. Pump Pressure	Mpa	16				16				16.5			17.5			16.5
	Pump Motor Power	kw	37+45				45+55				55+55			45+45+45			45+55+55
	Heating Power	kw	47.25				57.6				82			91			110.7
	Machine Dimension (L×W×H)	m	11.55×2.68×2.9				12.2×2.8×3.3				12.6×3.0×4.0			14.1×3.5×4.1			15.5×3.75×4.5
	Machine Weight	t	53				60				69			108			148

Item			HTW1360			HTW1760			HTW2760			HTW7360			HTG630			HTG900
			A	B	C	A	B	C	A	B	C	A	B	C	A	B	C	A	B	C
Injection Unit	Screw Diameter	mm	35	38	42	42	45	48	55	60	65	90	95	105	26	32	35	32	35	38
	Screw L/D Ratio	L/D	21.8	20	18.2	21.5	20	18.8	21.8	20	18.4	23.2	22	19.9	25.8	21	19.2	22.9	21	19.3
	Shot Volume (Theoretical)	cm3	150	180	220	270	310	350	540	640	750	2861	3188	3894	86	132	158	132	158	186
	Injection Weight (PS)	g	138	164	198	240	280	318	480	576	675	2603	2901	3543	78	118	138	118	138	168
	Injection Rate	g/s	92	108	120	118	130	138	180	220	242	610	640	785	60	90	96	90	96	110
	Plasticizing Capacity	g/s	16	21	26	18	22	27	38	45	52	76	85	98	10	12	16	12	16	18
	Injection Pressure	Mpa	219	186	152	183	159	140	169	142	121	195	175	143	300	203	170	221	185	155
	Screw Speed	rpm	220			180			165			110			220			200
Clamping Unit	Clamp Force	kn	1360			1760			2760			7360			630			900
	Open Stroke	mm	380			430			550			950			430			500
	Space Between Tie Bars (W×H)	mm	400×400			450×450			570×570			950×950			360×360			400×400
	Max. Mould Height	mm	450			480			580			960			600			700
	Min. Mould Height	mm	180			200			200			400			170			200
	Ejector Stroke	mm	120			135			150			280			125			150
	Ejector Force	kn	30			35			70			200			35			38
Others	Max. Pump Pressure	Mpa	16			16			16			16			16			17.5
	Pump Motor Power	kw	13			15			22			30+37			11			15
	Heating Power	kw	7.45			8.1			17.6			46.45			6.05			7.75
	Machine Dimension (L×W×H)	m	4.35×1.38×1.72			4.8×1.35×1.95			6.0×1.65×2.2			9.8×2.5×2.8			3.3×1.0×1.5			3.9×1.4×1.7
	Machine Weight	t	3.8			5			8.7			41.5			3.2			3.8

Item			HTK1000			HTK1200			HTK1500			HTK2400			HTK3600			HTK5000
			A	B	C	A	B	C	A	B	C	A	B	C	A	B	C	A	B	C
Injection Unit	Screw Diameter	mm		35	38	35	38	42	42	45	48	55	60		67	70	75	80	85	90
	Screw L/D Ratio	L/D		20.2	18.6	21.8	20	18.2	21.5	20	18.5	21.8	20		20.9	20	18.7	21.2	20	18.9
	Shot Volume (Theoretical)	cm3		160	190	150	180	220	270	310	350	540	640		1138	1240	1430	1965	2218	2490
	Injection Weight (PS)	g		144	168	138	164	198	240	280	318	480	576		1024	1120	1285	1770	2000	2240
	Injection Rate	g/s		90	100	92	108	120	118	130	138	180	220		265	289	332	404	456	512
	Plasticizing Capacity	g/s		14	18	14	18	21	18	22	27	30	38		50	60	65	80	100	118
	Injection Pressure	Mpa		170	144	219	186	152	183	159	140	169	142		171	157	137	168	149	133
	Screw Speed	rpm	220			220			180			165			160			150
Clamping Unit	Clamp Force	kn	1000			1200			1500			2400			3600			5000
	Open Stroke	mm	305			318			350			480			580			730
	Space Between Tie Bars (W×H)	mm	355×315			360×360			420×375			520×520			640×600			800×710
	Max. Mould Height	mm	320			370			380			480			630			720
	Min. Mould Height	mm	150			150			180			220			250			350
	Ejector Stroke	mm	70			75			80			100			125			170
	Ejector Force	kn	27			30			36			70			70			151
Others	Max. Pump Pressure	Mpa	16			16			16			16			16			16
	Pump Motor Power	kw	11			11			15			22			37			45
	Heating Power	kw	6.8			7.45			8.1			12.6			19.25			22
	Machine Dimension (L×W×H)	m	3.58×1.33×1.65			4.0×1.37×1.7			4.6×1.45×1.8			5.5×1.5×2.1			6.25×1.7×2.4			8.0×2.1×2.7
	Machine Weight	t	2.5			3			4.3			7.1			11.2			18

　

　

HOME | ABOUT US | SERVICE | CONTACT US
Copyrights © 2002-2005. Hebei Machinery Import and Export Co., Ltd. All Rights Reserved.