A MFS is an automatic filtration system for separation of solid-liquid solutions. Its principle is physical separation. The extent to which dissolved solids, turbidity and microorganisms are removed is determined by the size of the pores in the membranes (pore diameter: 0.1~50μm). Substances that are larger than the pores in the membranes are fully removed.

Micro filtration is pressure-dependent processes, which remove dissolved solids and other substances from water.

Micro filtration can be implemented in many different water treatment processes when particles with a diameter greater than 0.1 mm need to be removed from a liquid, such as suspended solids, bacteria and viruses, organic substance, remained chlorine, and so on.

Our micro filter is a compact system equipped with stainless steel casing, has feature of low maintenance and operation cost, compact design, less floor space, and so on.

• Filtration precision:    0.1, 0.2, 0.45, 1.0, 3.0, 5.0, 10, 20, and 50 micron.

• Diameter:    2.75” (69mm)
• Length:   10”, 20”, 30”, 40”
• Filtration area :   0.6m² (10”)
• Operating temperature :   80°C (Max)
• Forward pressure drop:   0.4Mpa (Max, at 25°C)
• Backward pressure drop:   0.3Mpa (Max, at 25°C)
• Team sterilization:   121°C, 30minutes  

Main specification of cartridge (for NL6 pleated type):

• Filtration precision :    0.22, 0.45, 0.65 micron.

• Diameter:    2.75” (69mm)
• Length :   10”, 20”, 30”, 40”
• Filtration area:   0.6m² (10”)
• Operating temperature:   60°C (Max)
• Forward pressure drop:   0.4Mpa (Max, at 25°C)
• Backward pressure drop:   0.3Mpa (Max, at 25°C)
• Team sterilization:   121°C, 30minutes